10.2.7. Installing HASP Device Driver

10.2.7.1. On Windows

The HASP Device Driver installation program (haspdinst.exe) is included in the delivery package and installed on the computer when you install the 1C:Enterprise server cluster.

To install HASP Device Driver, click Start – Programs – 1C:Enterprise 8 – Additionally – Protection driver installation.

You can also install the HASP Device Driver "manually". To do this, from the command line, run the haspdinst.exe program located in the \Program Files\1cv8\common\ directory with the -i command. Thus, the command line for installing the HASP Device Driver is as follows:

haspdinst -i

TIP. It is recommended that you first install the HASP Device Driver, and then attach the key to the USB port.

IMPORTANT. Disconnecting the USB protection key from the USB port during operation is prohibited.

If not needed, you can remove HASP Device Driver from the system. To remove HASP Device Driver, click Start – Programs – 1C:Enterprise 8 Additionally – Protection driver removal.

To remove the HASP Device Driver, you can also use the following command line:

haspdinst -r

10.2.7.2. On Linux

Download HASP Device Driver for Linux before the installation.

To install the HASP Device Driver, perform the following steps (actions must be performed as administrator):

Unpack the archive by executing the command:

tar xzf HASP_SRM_LINUX_3.50_Run-time_Installer_script.tar.gz

Go to the directory with the unpacked driver by executing the command:

cd HASP_SRM_LINUX_3.50_Run-time_Installer_script

Install the driver by executing the command (make sure that you enter the dot at the end of the command line):

./dinst .

TIP. It is recommended that you first install the HASP Device Driver, and then attach the key to the USB port.

IMPORTANT. Disconnecting the USB protection key from the USB port during operation is prohibited.

To remove the driver key, go to the directory with the unpacked driver and execute the command:

./dunst

10.2.7.3. On macOS

Download HASP Device Driver for macOS before the installation.

To install the driver, open this archive using the Finder, run the Install Sentinel Runtime Environment file, and then follow the instructions of the installer.

TIP. It is recommended that you first install the HASP Device Driver, and then attach the key to the USB port.

NOTE. Disconnecting the USB protection key from the USB port during operation is prohibited.

To delete the driver, open this archive using the Finder, run the Uninstall Sentinel Runtime Environment file, and then follow the instructions of the uninstaller.

<< Prev Next >>